Re: 1/35th scale armor kits
From: Ground Zero Games <jon@g...>
Date: Thu, 21 Mar 2002 14:31:51 +0000
Subject: Re: 1/35th scale armor kits
>Depends how worried you are about scale. Jon T uses 1/60 as the scale
ratio
>for all the 25mm GZG vehicles. They look fine with all the figs in the
GZG
>range (naturally). I would think that 1/35 scale models would be on the
big
>side for 25mm/28mm. I quite happily mix 25mm and 28mm figs - but then
I've
>never been too picky about scale. OTOH you might find some 1/35 models
will
>look OK with 25 or 28mm figs. At the end of the day, beauty is in the
eye
>of the beholder....
It all depends what you do with them. Given that a lot of SF vehicles
are
often depicted as much bigger than contemporary AFVs, then something
like a
1/35 Sheridan, Marder etc with some conversion to the hatches, an added
hover-skirt or grav modules or similar, makes a great _BIG_ tank/APC for
25/28mm SF.
But, they're much to big to really be used for what they actually are -
if
you want something to serve as a light tank or small APC, then look to
1/48
models - there are some very nice (and cheap) Chinese-made ones on the
market.
Jon (GZG)
>
>Mike
>
>
>
>Does anyone out there know how well 1/35th scale kits go with 25mm-28mm
>minis? Just curious since I've never purchased a kit of that scale.
>
>Thanks!
>
>
>
>HOPS VINCET! ATWTMATMUTATB
>
>
>_________________________________________________________________
>MSN Photos is the easiest way to share and print your photos:
>http://photos.msn.com/support/worldwide.aspx
>
>
>
>
>************************************************************
>This email has originated from a shared mail relay station for Bull
>Information Systems Ltd (Registration No: 2017873) and Integris Ltd (a
>Steria company, Registration No: 2706218).
>
>Privileged, confidential and/or copyright information may be contained
in
>this email, and is only for the use of the intended addressee. To copy,
>forward, disclose or otherwise use it in any way if you are not the
>intended recipient or responsible for delivering to him/her is
prohibited.
>
>If you receive this email by mistake, please advise the sender
immediately,
>by using the reply facility in your email software.
>
>We may monitor the content of emails sent and received via our network
for
>the purposes of ensuring compliance with policies and procedures.
>
>This message is subject to and does not create or vary any contractual
>relationships between Bull Information Systems Ltd or Integris Ltd.
>
>Both offices registered at: Computer House, Great West Road, Brentford,
>Middlesex, TW8 9DH
>*************************************************************