Prev: Re: Random Firing in Phases Next: RE: Concertina Wire, Camo Netting, Barbed Wire in 25mm

RE: Concertina Wire, Camo Netting, Barbed Wire in 25mm

From: "Brian Bell" <bkb@b...>
Date: Fri, 10 Sep 1999 22:54:20 -0400
Subject: RE: Concertina Wire, Camo Netting, Barbed Wire in 25mm

And of course mono wire:
Find 2 anchor points (call it left an right) such as trees, posts, etc.
Cut a piece of cardboard equal in length to the distance between the
anchor
points. Flock the cardboard. Paint a red line on it length-wise. Smear
the
red line.
Setup:
  Before the monowire is discovered: Nothing
  After someone stumbles across it: Place flocked cardboard with red
line.
Remove figure that "found" the wire.

;-)

---
Brian Bell
bkb@beol.net <mailto:bkb@beol.net>
http://members.xoom.com/rlyehable/
---

-----Original Message-----
From: owner-gzg-l@CSUA.Berkeley.EDU
[mailto:owner-gzg-l@CSUA.Berkeley.EDU]On Behalf Of Thomas Barclay
Sent: Friday, September 10, 1999 14:13
To: GZG List (E-mail)
Subject: Concertina Wire, Camo Netting, Barbed Wire in 25mm

Hi all.

You modellers out there who knew 50 ways to make rivets ought to
surely have some suggestions on:

Straight strand barbed wire.

Roll concertina (razor) wire.

Cam netting. Specifically the netting that has leafy bits of plastic
hanging off it.

How can I best fab these in 25mm?

Thomas Barclay
Software UberMensch
xwave solutions
(613) 831-2018 x 3008

Prev: Re: Random Firing in Phases Next: RE: Concertina Wire, Camo Netting, Barbed Wire in 25mm