RE: [DS] Kit Bashing

I vote for a bit of putty to smooth out the transition.

--Binhan

> -----Original Message-----
> From: Brian B [mailto:greywanderer987@yahoo.com]
> Sent: Thursday, November 20, 2003 3:33 PM
> To: gzg-l@csua.berkeley.edu
> Subject: RE: [DS] Kit Bashing
> 
> 
> I've got the engines covered.  The problem is, the
> body is extremely aerodynamic from the nose to just
> aft of the cockpit, but then you have this
> significantly blunt forward-facing surface where the
> mailbox-shaped bit starts. See this link for
> reference:
> 
> http://www.akasa.bc.ca/tfm/brkwrs/MadCatMech/madcat30.html
> 
> My question is, how to render said border between hull
> areas more aerodynamic.
> 
> 
> --- "Robertson, Brendan"
> <Brendan.Robertson@dva.gov.au> wrote:
> > Put huge turbo boosters on the back for high speed?
> > 
> > Brendan
> > 'Neath Southern Skies
> > 
> > > -----Original Message-----
> > > From:	Brian B [SMTP:greywanderer987@yahoo.com]
> > > Sent:	Friday, November 21, 2003 6:57 AM
> > > To:	gzg-l@csua.berkeley.edu
> > > Subject:	[DS] Kit Bashing
> > > 
> > > 
> > > My question is, how should I eliminate this
> > detail? 
> > > Is it possible to carve the resin, or should I use
> > > some sort of putty to fill from the hull edge down
> > to
> > > the canopy?  Suggestions?
> > > 
> > > 
> > IMPORTANT: Notice to be read with this E-mail 
> > 1. Before opening any attachments, please check them
> > for 
> > viruses and defects.  2. This e-mail (including any 
> > attachments) may contain confidential information
> > for the 
> > use of the intended recipient.  3. If you are not
> > the 
> > intended recipient, please: contact the sender by
> > return
> > e-mail, to notify the misdirection; do not copy,
> > print,
> > re-transmit, store or act in reliance on this
> > e-mail; and 
> > delete and destroy all copies of this e-mail.  4.
> > Any views 
> > expressed in this e-mail are those of the sender and
> > are not 
> > a statement of Australian Government policy unless
> > otherwise stated. 
> > 5. Finally, please do not remove this notice, so
> > that any 
> > other readers are aware of these restrictions.
> > 
> > 
> 
> 
> =====
> "Teach a man to make fire, and he will be warm for a day.  
> Set a man on fire, and he will be warm for the rest of his 
> life."   -- John A. Hrastar
> 
> __________________________________
> Do you Yahoo!?
> Free Pop-Up Blocker - Get it now
> http://companion.yahoo.com/
>