Prev: Re: [GZG] Help with 15mm Landing Gear Next: Re: [GZG] Help with 15mm Landing Gear

Re: [GZG] Help with 15mm Landing Gear

From: John Tailby <john_tailby@x...>
Date: Thu, 12 Mar 2009 12:51:45 +1100 (EST)
Subject: Re: [GZG] Help with 15mm Landing Gear

_______________________________________________
Gzg-l mailing list
Gzg-l@vermouth.csua.berkeley.edu
http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l15m
m is normally 1-100 scale.

The effort to make the legs could depend on the design you are going
for.

Something like a Space 1999 Eagle Transporter could be easier than say a
leg of an Apolo lunar lander.

If you want to make several that look the same you might need to set up
a template.

Wire from paperclips and plastic card for the skids might be a good
place to start.

________________________________
From: "emu2020@comcast.net" <emu2020@comcast.net>
To: gzg-l@vermouth.csua.berkeley.edu
Sent: Thursday, 12 March, 2009 2:16:19 PM
Subject: Re: [GZG] Help with 15mm Landing Gear

You know I have been considering that very thing. The problem is the
price of the Hind models that I have found. Might have to Ebay a couple.
1/144 is too small but 1/72 seems so huge. Those gunships were pretty
gigantic though. 
 
-Eli 


Prev: Re: [GZG] Help with 15mm Landing Gear Next: Re: [GZG] Help with 15mm Landing Gear